3mscotchguard

dp-1 Preferred
Star Shield Solutions is proud to be a Automotive Aftermarket Preferred Scotchgard Application Provider. This allows us to offer many services and programs that will benefit your company.

Certified Training Facility
Our Training center is a state-of-the-art facility that offers a 3-day course that will certify attendees as Installers. Our course is action-packed, hands-on and run by our Training Manager with over 6 years of experience in PPF installation. Learn more…

Certified Installers
Star Shield Solutions’ employees are all Certified. This assures that our installations are completed by fully trained and certified installers only. Star Shield Solutions’ installers are held to exceptional standards.

Southern California Preferred PPF Applicator
No-Fault Warranty Provider

Material Specification For the Professional Applicator
Published with the permission of < Corporation. Information Provided by Product Bulletin 1-45.

General Description
Scotchcal™ High Performance Protective Films are noted for their overall excellent performance. These rugged, yellowing-resistant urethane films protect against stone chips, bug damage, abrasion and weathering while allowing a vehicle’s color brilliance to show through and its design intent to be maintained. Approved by Automotive OEMs, these durable films are flexible, comfortable and easy to apply. PUL 0612 and PUL 1212 are available in rolls of varying widths.

Product Construction
PUL 0612 protective film layers
PUL 1212 protective film layers

Shelf Life
It is recommended that temperatures of 13 degrees C – 32 degrees C (55 degrees RF- 90 degrees F) and 44 percent – 55 percent relative humidity be maintained in the film storage location. Film should be used within one year of purchase.

Expected Effective Performance Characteristics
Performance statements are based upon representative experience from testing throughout the United States; however, actual performance will be determined by substrate selection and preparation, exposure conditions, and maintenance of the marking. When applied, or when processed and applied according to recommended procedures, this product will conform to specifications for two years following purchase from .

Physical and Chemical Characteristics
Values given are typical and are not for use as specifications. If a specification is desired, a custom specification will be prepared. Any requests for a specification should be submitted through your local representative.

Performance Properties
These values represent typical data when tested to major OEM urethane specifications and should not be used for product approval.

Results
Performance Test and Condition PUL 0612 PUL 1212
Tensile MPa (PSI) 12 (1740) 12 (1740)
Elongation 200 Percent 200 Percent
Peel Adhesion
Initial State – 20 min @ 23 deg. C (73 deg. F) N/m (lb/in) 600 (3.4) 600 (3.4)
Room Temp – 72 hrs @ 23 deg. C (73 deg. F) N/m (lb/in) 700 (4.0) 700 (4.0)
Heat Resistance – 168 hrs @70 deg. C (158 deg. F) N/m (lb/in) 700(4.0) 700(4.0)
Moisture Resistance – 168 hrs @ 35 deg C (95 deg F) 700(4.0) 700(4.0)
Thermal Cycle 700(4.0) 700(4.0)
Environmental Simulation
Acid Resistance Pass Pass
Fuel Resistance Pass Pass
Heat Resistance – 168 hrs @ 70 deg. C (158 deg F) Pass Pass
Moisture Resistance – 168 hrs @ 35 deg C (95 deg F)
100% R.H. – 2 hrs.@70 deg C (158 deg F)
Pass Pass
Thermal Cycle Pass Pass
Solvent Resistance Pass Pass
Shrinkage <.1 Percent <.1 Percent
Gravelometer (SAE J400) No Ruptures No Ruptures
Outdoor Deck Weathering
Arizona 45 deg. South Facing (unbacked)
– No objectionable gloss loss or change, adhesion
loss, film crackup, or crazing.
24 months Less than 10 percent gloss loss and no more than 2.5 De color change Less than 10 percent gloss loss and no more than 2.5 De color change
Florida 5 Deg South Facing (unbacked)
-No objectionable gloss loss or change, adhesion
loss, film crackup, or crazing.
24 months Less than 10 percent gloss loss and no more than 2.5 De color change Less than 10 percent gloss loss and no more than 2.5 De color change

Product Characteristics

Adhesive: Acrylic PSA
Liner: White – Bleached paper with release coating
Max Service Temp: Film softens above 67 deg C (150 deg F)